Filter
Top Products
Page 9
R
E
C
Y
C
L
E
1
.
8
0
0
.
8
2
2
.
8
8
3
7
RBRC
Ni
Cd
BATTERY REMOVAL
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws may
prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
BATTERY REMOVAL, PREPARATION FOR RECY-
CLING
See Figure 5.
TO REMOVE:
■ Remove the four screws securing motor housing cover,
then remove cover.
■ Lift batteries from motor housing enough to expose
leads and battery terminals. Disconnect leads from
battery terminals. Note: Be careful not to break battery
terminals when disconnecting leads.
WARNING:
Upon removal, cover the battery terminals with heavy
duty adhesive tape. Do not attempt to destroy or
disassemble batteries or remove any of its components.
Nickel-cadmium batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these warnings
could result in fire and/or serious injury.
BATTERIES
Your screwdriver is equipped with 2 nickel-cadmium
rechargeable batteries. Length of service from each charging
will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. To remove batteries, follow BATTERY
REMOVAL instructions. Handling of these batteries,
especially when wearing rings and jewelry, could result in a
serious burn.
To obtain the longest possible battery life, we suggest the
following:
■ Store and charge your batteries in a cool area.
Temperatures above or below normal room temperature
will shorten battery life.
■ Never store batteries in a discharged condition. Recharge
them immediately after they are discharged.
■ All batteries gradually lose their charge. The higher the
temperature the quicker they lose their charge. If you
store your tool for long periods of time without using it,
recharge the batteries every month or two. This practice
will prolong battery life.
Fig. 5
SCREW(S)
COVER
MOTOR
HOUSING
BATTERIES
BATTERY
TERMINALS
14
14
1
6
1
6
18
18
20
20
SCREW(S)
BATTERY
LEADS