Filter
Top Products
9
FEATURES
KNOW YOUR CORDLESS NAILER/STAPLER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SWITCH TRIGGER
The switch trigger is conveniently located under the handle.
Pulling the switch trigger will fire one brad or staple at a
time.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and accessories from the box.
Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Nailer/Stapler
Lanyard (not included in Combo)
3/4 in. and 1-1/4 in. Brads
5/16 in. and 9/16 in. Staples
Operator’s Manual
Warranty Registration Card
SAFETY INTERLOCK
The safety interlock prevents the nailer/stapler from turning
on accidentally. Push the activation foot of the nailer/
stapler down flush to the workpiece to disengage the
safety interlock.
DEPTH ADJUSTMENT KNOB
Use the depth adjustment knob to control the depth of the
staple or brad.
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.