Filter
Top Products
6
PULL TAB TO
REMOVE
Fig. 2
REMOVING THE WARNING LABEL
See Figure 2.
The spotlight has a cling-type attached warning label on
the lens. Remove this warning label before use as shown
in figure 2.
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the purpose listed below:
To illuminate any areas requiring additional light
To illuminate distant objects
OPERATION
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ASSEMBLY
WARNING:
The lens gets very hot during use. To reduce the risk of
burns, do not touch hot lens. To reduce the risk of fire,
keep away from combustible materials while in opera-
tion
.
CAUTION:
Operate in a well ventilated area. Do not block vents.
Keep them clear to allow proper ventilation.
This product will accept Ryobi One+ 18 V lithium-ion battery
packs and Ryobi One+ 18 V nickel-cadmium battery packs.
Both types of battery packs are shown on this page. Following
pages will show the lithium-ion 18 V battery pack.
For complete charging instructions, refer to the operator’s
manual for the P113 or P110 charger. For battery pack
instructions, see the manual for the P104 lithium-ion battery
pack or the P100 nickel-cadmium battery pack.