Filter
Top Products
Page 2
Look for this symbol to point out important safety precautions. It means attention!!!
Your safety is involved.
The following recommended accessories are current and were available at the time this manual was printed.
■ 5-1/2 in. (140 mm) Thin Kerf Blade
■ Optional Rip Guide
Your circular saw has been shipped completely assembled
except for the blade. Inspect it carefully to make sure no
breakage or damage has occurred during shipping. If any
parts are damaged or missing, contact your nearest Authorized
Service Center to obtain replacement parts before attempting
to operate saw. A blade, blade wrench, and this operator's
manual are also included.
■ Table of Contents ............................................................................................................................................................2
■ Accessories .....................................................................................................................................................................2
■ Unpacking....................................................................................................................................................................... 2
■ General Safety Rules ......................................................................................................................................................3
■ Specific Safety Rules .................................................................................................................................................. 4-5
■ Important Safety Instructions For Charger .................................................................................................................. 5-6
■ Symbols ...........................................................................................................................................................................7
■ Features ..........................................................................................................................................................................8
■ Operation ................................................................................................................................................................... 9-18
■ Maintenance ................................................................................................................................................................. 19
■ Battery Pack Preparation For Recycling ...................................................................................................................... 19
■ Parts Ordering / Service ............................................................................................................................................... 20
TABLE OF CONTENTS
ACCESSORIES
UNPACKING
The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z871.1.
WARNING:
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury. If any parts are
damaged or missing, please contact 1-800-525-2579 for
assistance.