Sanyo CVW-EXA284 Tool Storage User Manual


 
13
3.8 Installing Patch Ends
1. Apply gasket to case body (per previous instructions).
2. If present, remove protective film from inside wall of Patch
End.
3. Place Patch End to line up with bolt holes.
4. From inside unit ratchet in M8 & optional M5 bolt into Patch
End until secure.
5. Apply Silicone sealant between inside of Patch End and lower
frame (see drawing to the left for details).
6. Attach side cover (item 3 in above drawing)
Gasket
M8 Bolts
Side Cover
Suction Lamp Cover Joint
M5
Bolts
Apply silicone sealant inside
after installing the patch end.
CVW-EXA284/224
CVW-EXA184/124