Filter
Top Products
www.schneider-electric.com 4/4 S1A10942 - 02/2012
bFr
Fr1
tCC
I-O-
CtL-
FUn-
FLt-
COM-
SUP-
SEt-
drC-
rEF-
LOC
35.
rdY
rEN
3s
MODE
MODE
3s
MODE
2s
ESC
rdY
[SPEED REFERENCE]
[SETTINGS]
[MOTOR CONTROL]
[INPUTS / OUTPUTS CFG]
[APPLICATION FUNCT.]
[COMMAND]
[FAULT MANAGEMENT]
[COMMUNICATION]
[MONITORING]
ESC ENT
[Output frequency] (Hz)
= ENT
Menus structure
Parameter selection
SEt- ACC
dEC
26.
26.
15.
= ENT
SFr
ESC
ESC
ENT ENT
ENT
ESC
Refer to the programming manual (BBV46385) for comprehensive menu descriptions.
A dash appears after menu codes to differentiate them from parameter codes.
Example:
[SETTINGS] (SEt-), ACC parameter.
1 flash
(save)
These 3 parameters are
only visible at first power up
of the drive.
Settings can be changed
subsequently in menu:
drC- for bFr
CtL- for Fr1
I-O- for tCC.