Schumacher 94080034 Battery Charger User Manual


 
5
BATTERY CHARGING - AC CONNECTIONS8.
This battery charger is for use on a nominal 120-volt circuit.8.1
NOTE: The INC-800A intermittently draws more than 15 amps of current.
We recommend that you either install a 20 amp circuit or do not run any-
thing else on the same circuit as the INC-800A or you may trip the breaker
supplying the AC power.
DANGER – Never alter AC cord or plug provided – if it does not t the
outlet, have proper outlet installed by a qualied electrician. Improper
connection can result in a risk of an electric shock.
Recommended minimum AWG size for extension cords for battery
chargers
Use of an extension cord is not recommended by manufacturer. If one 8.2
must be used, refer to the following chart:
Length of
Cord
feet (m)
25
(7.6)
50
(15.2)
Gauge 12 10
8.3
Grounding Methods