Filter
Top Products
• 6 •
ASSEMBLY INSTRUCTIONS9.
No assembly required•
CONTROL PANEL10.
DIGITAL DISPLAY BUTTON 10.1
Use this button to set the function of the digital display to one of the follow-
ing:
BATTERY %:• The digital display shows an estimate of the percent of
charge of the battery connected to the charger battery clips.
VOLTAGE: • The digital display shows the voltage at the charger battery
clips in DC volts.
BATTERY TYPE BUTTON 10.2
Use this button to set the type of battery to be charged to one of the fol-
lowing:
Regular• – Set button to STANDARD. This battery type is usually used
in cars, trucks and motorcycles. These batteries have vent caps and are
often marked “Low Maintenance” or “Maintenance-free”. This type of
battery is designed to deliver quick bursts of energy (such as starting en-
gines) and have a greater plate count. The plates will also be thinner and
have somewhat different material composition. Regular batteries should
not be used for deep cycle applications
Deep-Cycle• – Set button to STANDARD. Deep-cycle batteries are usu-
ally marked as “Deep-Cycle” or “Marine”. Deep-cycle batteries are usually
larger than the other types. This type of battery has less instant energy
but somewhat greater long-term energy delivery than regular batteries.
Deep cycle batteries have thicker plates and can survive a number of
discharge cycles.