Filter
Top Products
• 7 •
ASSEMBLY INSTRUCTIONS9.
No assembly required.
PRODUCT FEATURES 10.
MOUNTING CHARGER TO A FLAT SURFACE 11.
Do not mount charger in a location with restricted air ow. The area
where the charger is to be fastened must be dry, well ventilated and
away from any combustible material and fumes.
Turn off and disconnect charger.11.1
Place the back of the charger with mounting bracket against a secure, at 11.2
surface.
Securely mount charger to a at surface with a minimum of one and a half 11.3
inches of clearance on each side.
Charger Status LEDs (located on side of unit)1.
Battery Clamp Output Cord2.
30 Pin XLR 3-12C Output Cord3.
3/8” Dia. Ring Terminal Output Cord4.
1
2
3
4