Filter
Top Products
• 17 •
BEFORE RETURNING FOR REPAIRS
When a charging problem arises, make certain that the battery is capable 15.1
of accepting a normal charge. Use a good battery to double check all con-
nections, AC outlet for a full 120-volts, charger clamps for correct polarity
and the quality of the connections from the cables to the clamps and from
the clamps to the battery system. The clamps must be clean.
When a battery is very cold, partially charged or sulfated, it will not draw 15.2
the full rated amperes from the charger. It is both dangerous and damag-
ing to a battery to force higher amperage into it than it can effectively use
in recharging.
When an UNKNOWN OPERATING PROBLEM arises, please read the 15.3
complete manual and call the customer service number for information
that will usually eliminate the need for return.
If the above solutions do not eliminate the problem or for information
about troubleshooting or replacement parts, call toll-free from anywhere
in the U.S.A.
1-800-621-5485
7:00 am to 5:00 pm Central Time Monday thru Friday