Filter
Top Products
• 9 •
10. FEATURES/CONTROL PANEL
3
5
1
2
1. Battery Status LEDs
2. AC Power cord
3. Quick-Connect Battery Clamp
Cable Assembly
4. Quick-Connect Cable
with Fuse
5. Cord Set w/12V Cigarette
Adapter
4
10.1 Digital Display
The digital display gives a digital indication of the status of the
battery and charger. See the TROUBLESHOOTING section for a
complete list of messages.
10.2 LED Display
CHARGING (yellow) LED lit: Indicates the charger is charging
the battery.
CHARGED (green) LED lit: Indicates the battery is fully charged
and the charger is in maintain mode.
11. OPERATING INSTRUCTIONS
This battery charger must be properly assembled in
accordance with the assembly instructions before it is used.
The charger does not have an ON/OFF switch. Plug the SP3 into
a 120V AC electrical wall outlet only after battery connections
have been made.
NOTE: This charger is equipped with an auto-start feature. It will
not supply current to the battery clips until a battery is properly
connected. The clips will not spark if touched together.