Filter
Top Products
Assembly
Assemble Drawers
1. Set out:
-two 10" drawers
-two 6" drawers
-two 3" drawers
-six drawer fronts
-forty-eight drawer fasteners.
2. Slide drawer fronts down onto drawers.
3. From inside drawer surface, push
drawer fastener into each hole and i_to
drawer front.
4. Set drawers aside for installation after
saw has been mounted.
Attach Handwheel
1. Set out:
-handwheel
-#10 x 1/2"long pan head screw
-# 10 lock washer
-hex bushing.
Drawer Front
/
Q °Drawe_
Drawer
/_ Fastener
2. Put hex bushing into opening in back
of handwheel.
3. Align hex bushing on elevation shaft.
4. Put washer on screw; put screw into
hole in center of handwheel and tighten
with screwdriver.
26