Filter
Top Products
UI
and checking contents
1121 Wro="
1 7/]6_i Wrench Medium Screwdriver
3/41Wre.ch
" " 3/8' Wrench
Model 113 206801 Jointer/P aner is shipped complete n
one carton but DOES NOT INCLUDE Steel Legs,or motor.
Model: 113,206931 JointerlPlaner is shipped complete in
one carton but INCLUDES Steei Legs, and Motor.
Separate all parts from packing materials and check each
one with the itlUstrat{on and the list of Loose Parts to make
certain all items are accounted for, before discarding any
packing material:
tf any parts are missing, do not attempt to assemble the
jointer/planer; plug n the Dower cord or turner the switch
on until the missing parts are obtained and are installed
correctly.
Remove the protective oi that is applied to all unpainted
metal surfaces. Use any ordinary household type grease and
spot remover.
CAUTION: Never use gasoline, naptha or similar highly
volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry c oth.
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERAT aNAL INSTRUCTIONS.
i •
Combination Square
TABLE OF LOOSE PARTS
Item
No. Description Qty,
A Jainter-Plaeer .......................... 1
B V-Belt, I/2x 52" . ...................... t
*C 5/32 Setscrew Wrench ................... t
*D 1/8 Setscrew Wrench .................... I
*E Motor Pulley, 2-1/2" Dia.................. 1
*F Sliding Guard Knob ..................... 1
"13 Concave Plastic Washer ................... 2
H Sliding Guard .......................... 1
*J Sliding Guard Rod ...................... !
*K Nut, 1/2 - 13 ........................... !
*L Lockwasher, 1/2 ........................ 1
*M Lockwasher, No. 10 ..................... 2
N Screw, Pan Hd,, 10 - 32 x t/4 .............. 2
0 Owners Manual ......................... 1
*P Depth of Cut Handwheel ................. 1
*Q Screw, Seres, I/4- 20 x 1-1/4 .............. 1
R 0n/0ff Power OutJet .................... 1
*S Washe_,17/64 × 1/2 x 1/32 ............... 2
*T Lockwesher, E×ternaJ 1/4 ................. 2
*U Screw, Pan Hd. 1/4-213 x 1/2 ............... 2
V Jointer-Planer Belt Guard ................. 1
W Attaching Hardware (2 Nuts, 2 Botts)
X _lt Guard Clips ........................ 3
Y Belt Guard Support Bracket ............... 1
Z Belt Guard Support ..................... 1
AA Screw Pan Hd. 10-32 x ti2 ................ 2
AB Motor Pulley Belt Guard .................. 1
AC Switch Key ............................ 1
AD Held Dawn/Push Black .................. 2
AD
A
\
AA (,€_._._A B
Y x
W V U T