Filter
Top Products
operation
turn the Tailstock to the right-hand side of the Lathe
bed and replace the: left T_e Rod. Attach a Spindle
Bracket to tbe right-hand BraCket: With the C_ampP ate
or a piece of plyWood across the Vertical Channels, , ,,
alignthe _'ight-bend cone-Point Set Screw with the
point in the Cup center asshown.
POINT OF
CUP CENTER
\
\
CLAMP PLATE /"
J
./
7, If the existing spindle is 2-1/2 inchesin diameter or less,
it can be usedin place of a template.
EXISTING SPINDLE
8. tf the existing spindle is larger than 2-1/2 inches in
diameter, it witl benecessary to make a template.
22