Sears 28.71234 Battery Charger User Manual


 
17
Important:
Do not try to start the engine without a battery in it. You could cause dam-
age to the electrical system.
If the engine does turn over, but never starts up, there is not a problem
with the starting system, there is a problem somewhere else with the
vehicle.
STOP cranking the engine until the other problem has been diagnosed
and corrected.
NOTE: The GFCI outlet should not be used while the Charger is in the
Engine Start Mode.
MAINTENANCE INSTRUCTIONS16.
Before performing maintenance, unplug and disconnect battery charger 16.1
(see sections 6.7 or 7.6).
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil 16.2
from terminals, cords, and the charger case.
Through routine maintenance, ensure all user installed parts are secured.16.3
STORAGE INSTRUCTIONS17.
Store charger unplugged, in an upright condition. Cord will still conduct 17.1
electricity until it is unplugged from outlet.
Store inside, in a dry, cool place (unless you’re using an on-board Marine 17.2
Charger ).
Do not store clips on handle, clipped together, on or around metal, or 17.3
clipped to cables.