Filter
Top Products
• 7 •
GROUNDING AND AC POWER CORD CONNECTIONS8.
RISK OF ELECTRIC SHOCK OR FIRE.
This battery charger is for use on a nominal 120-volt 8.1
circuit and has a grounded plug that looks like the plug
illustrated. The charger must be grounded to reduce
the risk of electric shock. The plug must be plugged
into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. The
plug pins must t the receptacle (outlet). Do not use with
an ungrounded system.
8.2 Never alter the AC cord or plug provided – if it does not t
the outlet, have a proper grounded outlet installed by a qualied electrician. An
improper connection can result in a risk of an electric shock or electrocution.
NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not
allowed in Canada. Use of an adapter plug in the United States is not
recommended and should not be used.
Recommended minimum AWG size for extension cord:8.3
100 feet long or less - use a 10 gauge extension cord.•
Over 100 feet long - use an 8 gauge extension cord.•
ASSEMBLY INSTRUCTIONS9.
It is important to fully assemble your charger before use. Remove all cord 9.1
wraps and uncoil the cables prior to using the battery charger. Follow these
instructions for assembly.
PARTS TOOLS NEEDED
(2) 10-32, thread cutting screws
(4) ¼-20, thread cutting screws
(4) Phillips head sheet metal screws
(2) wheels
(1) axle
(2) axle caps
(2) axle brackets
(1) handle
(1) foot
3/8” wrench (for mounting foot)
5/16” wrench (for mounting wheels)
hammer
screwdriver (at blade)
screwdriver (Phillips)