Filter
Top Products
L 1039-10|7
Putting the charger into operation
Connecting the charger to and disconnecting it from the
mains
To connect the charger to the mains and switch it on:
̈ Connect the hollow jack plug of the of the NT 12-50C mains unit to the hollow
jack socket 6 of the charger.
̈ Pass the cable of the mains unit through the cable grip 5 as shown.
̈ Connect the mains cable (EU, UK or US version) to the mains unit and to a wall
socket.
All status LEDs 3 and 8 light up for a brief moment. The charger is switched on
and in standby mode.
To switch the charger off and disconnect it from the mains:
̈ Pull out the mains plug from the wall socket.
NT 12-50C
EU
UK
US
6
5