Filter
Top Products
22
If a problem occurs ...
You hear the sound only with one ear
The sound of your sound source is hardly intelligible
Does the receiver’s
Sennheiser logo face
the transmitter?
Wear the receiver the right way
round, with the Sennheiser logo
facing the transmitter.
Is the volume of the
sound source suffi-
cient?
Set the volume on your sound
source to a medium value.
Is the volume of the
receiver sufficient?
Increase the volume by turning the
volume control
1 on the receiver
(see page 13).
Is the rechargeable
battery inserted
properly into the
receiver and fully
charged?
Remove the rechargeable battery
and reinsert it into the receiver.
If this doesn’t help: recharge the
rechargeable battery
(see page 17).
Possible cause Solution
Is the balance
adjusted correctly?
Turn the balance control
2 to the
left or right (see page 13).
Is the transmitter
set to mono?
Set the mono/stereo switch B
on the transmitter to the left
(see page 14).
Possible cause Solution
Is the speech intelli-
gibility enhance-
ment out of adjust-
ment?
Press the “speech intelligibility”
button
9 on the transmitter
repeatedly until the sound is
optimally adjusted to your needs
(see page 15).
Do you use a plasma
TV screen?
Make sure that the transmitter is
placed as far as possible from your
plasma TV screen (see page 6).
Is the receiver still
within the trans-
mitter’s range?
Move the receiver closer to the
transmitter.
Possible cause Solution