Filter
Top Products
Model W1780 1
1
⁄4" Brad Nailer
-5-
Compressed Air System
Exceeding the maximum permissible
operating pressure may damage the
nailer and cause it to malfunction.
To protect yourself from personal
injury, DO NOT allow the air pressure
to exceed the recommended
pressure for this nailer!
The Model W1780 is designed to be
operated at 60-100 PSI using clean,
dry, regulated, compressed air. Do not
exceed the 120 PSI maximum pressure
for your model.
Before using your new nailer, regulate
the air pressure to the minimum PSI for
your model.
An in-line filter/lubricator/regulator unit
can be installed as depicted in Figure 1.
This filter/lubricator/regulator unit
will protect your tool from damaging
water build-up, allow you to adjust and
maintain regulated air pressure, and
save you the inconvenience of having to
manually lubricate your tool every time
you use it.
If you plan on installing a filter/
lubricator/regulator unit in your
compressed air system, always follow the
connection instructions that come with
the unit.
Figure 1. Typical filter/lubricator/regulator installation order.