Simplicity shd-1t Power Hammer User Manual


 
Automatic Self-Adjusting Nozzle
Your Simplicity upright vacuum cleaner is designed with an Automatic Self-Adjusting Nozzle. No manual
adjustments are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height.
This self-adjusting feature allows the nozzle to float evenly over all carpet pile surfaces.
7
Optional Cleaning Tools/Accessories
TDK-15
Deluxe Attachment Set (Fig. 1)
12-foot wire hose
Extension wand (2 pieces)
Dusting brush
Crevice tool
Upholstery tool with brush
Deluxe floor brush
TWK-15
Standard Attachment Set (Fig. 2)
15-foot hose
Extension wand (2 pieces)
Deluxe floor brush
Connecting the hose assembly to the vacuum cleaner
Open the lid located on the back side of the vacuum cleaner and
insert the plastic end of the hose assembly into the cleaning
attachment opening (Fig. 3). Then connect a tool to the curved
wand end of the hose assembly.
On-Board Tool Cleaning
Your vacuum is equipped with on-board
cleaning tools including a two-piece extension wand,
stretch hose, dusting brush and a crevice tool.
1. Remove the extension wand from the body of the vacuum
cleaner. Insert one end of the wand into the other and
twist to tighten.
2. Insert any of the tools onto the end of the wand.
Fig. 3
Fig. 1
Fig. 2