Filter
Top Products
-5-
..3>398+6#+0/>C'+<8381=
and does not touch the blade or any other part,
in all angles and depths of cut.
2/-5>2/9:/<+>39890>2/69A/<1?+<.
=:<3810>2/1?+<.+8.>2/=:<381+</89>
9:/<+>381:<9:/<6C>2/C7?=>,/=/<@3-/.
,/09</ ?=/ Lower guard may operate
sluggishly due to damaged parts, gummy
deposits, or a buildup of debris.
9A/<1?+<.=29?6.,/</><+->/.7+8?+66C
986C09<=:/-3+6-?>==?-2+=F 6?81/?>=G
+8.F97:9?8.?>=G"+3=/69A/<1?+<.
,C69A/<1?+<.630>6/@/<+8.+==998+=
,6+.//8>/<=>2/7+>/<3+669A/<1?+<.7?=>
,/</6/+=/. For all other sawing, the lower
guard should operate automatically.
6A+C=9,=/<@/>2+>>2/69A/<1?+<.3=
-9@/<381>2/,6+./,/09</:6+-381=+A
.9A898,/8-29<0699< An unprotected,
coasting blade will cause the saw to walk
backwards, cutting whatever is in its path. Be
aware of the time it takes for the blade to stop
after switch is released.
989><?8>2/>996A236/-+<<C3813>+>C9?<
=3./9A/<1?+<.7+C,/9:/8/.,C+
-98>+->A3>2C9?<-69>2381 Accidental
contact with the spinning saw blade could
result in serious personal injury.
/<39.3-+66C</79@/>2/,6+./-6/+8>2/
?::/<69A/<1?+<.=+8.>2/2?,+</+A3>2
5/<9=/8/+8.A3:/3>.<C9<,69A3>-6/+8
A3>2-97:</==/.+3<Preventive maintenance
and properly operating guard will reduce the
probability of an accident.
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
989>?=/986C<+>/.>996=A3>2+
:9A/<=?::6CWhile the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
//:2+8.6/=.<C-6/+8+8.0<//0<97936
+8.1</+=/Slippery hands cannot safely
control the power tool.
%=/-6+7:=9<+89>2/<:<+->3-+6A+C>9
=/-?</+8.=?::9<>>2/A9<5:3/-/>9+
=>+,6/:6+>09<7Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
/@/69:+:/<39.3-7+38>/8+8-/=-2/.?6/
09<C9?<>996'2/8-6/+8381+>996,/
-+</0?689>>9.3=+==/7,6/+8C:9<>39890
>2/ >996 =38-/ 38>/<8+6 A3</= 7+C ,/
73=:6+-/.9<:38-2/.9<=+0/>C1?+<.</>?<8
=:<381= 7+C ,/ 37:<9:/<6C 79?8>/.
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Risk of injury to user. The power cord must only
be serviced by a Skil Factory Service Center or
Autho rized Skil Service Station.
#97/.?=>-</+>/.,C:9A/<
=+8.381=+A3811<38.381
.<366381+8.9>2/<-98=><?->398+->3@3>3/=
-98>+38=-2/73-+6=589A8>9-+?=/-+8-/<
,3<>2./0/->=9<9>2/<</:<9.?->3@/2+<7
#97//B+7:6/=90>2/=/-2/73-+6=+</
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
!
WARNING
SM 1619X05344 03-10:SM 1619X05344 03-10 3/10/10 3:06 PM Page 5