Filter
Top Products
-14-
417$.'*116+0)
Read instruction manual first! Remove plug from the power source before
making adjustments or assembling accessories.
1. Power cord is not plugged in.
2. Power source fuse or circuit breaker tripped.
3. Cord damaged.
4. Burned out switch.
! 1. Plug tool into power source.
2. Replace fuse or reset tripped circuit breaker. (If the product repeatedly causes
the circuit or fuse to trip/blow, discontinue use immediately and have it serviced by
an Authorized Skil Service Center or Service Station.)
3. Inspect cord for damage. If damaged, have cord replaced by an Authorized Skil
Service Center or Service Station.
4. Have switch replaced by an Authorized Skil Service Center or Service Station.
1. Extension cord has insufficient gauge or is too long.
2. If equipped with variable speed, tool may not set at maximum RPM.
3. Low house voltage.
! 1. Replace with adequate extension cord (Page 12).
2. If equipped with variable speed, check speed setting.
3. Contact your electric company.
!
WARNING
SM 2610008537 11-09:SM 2610008537 11-09 11/12/09 8:33 AM Page 14