Filter
Top Products
Disassemble 4-way valve
Unscrew the nut holding 4-way coil and remove the coil;
Use wet cotton cloth to wrap 4-way valve;unsodler 4 points
connecting 4-way valve and remove it.
Be quick during the process;try to make the cotton
wet all the time.Don't allow the flame to burn the
lead-out calbe of compressor
Refer to figure 7-22)
Disassemble motor and motor support
Unscrew four tapping screws fixing the motor,and
remove the motor.Unscrew the two tapping screws fixing
the motor support,lift and remove it.
(Refer to figure 7-21)
4-way valve
soldering points
motor
motor support
cable
screws
screws
Operating procedures /pictures
axial-flow fan
nut
Loosen the nut with spanner and remove it.
Disassemble axial-flow fan
-21-