Southbend SB1053F Turn-X Lathe User Manual


 
-8-
For Machines Mfg. Since 3/11
16-Speed Gearhead Lathe
INTRODUCTION
Foot Brake
This lathe is equipped with a foot brake (see
Figure 10) to quickly stop the spindle instead of
allowing it to coast to a stop on its own. Pushing
the foot brake while the spindle is ON also cuts
power to the motor.
After the foot brake is used, the spindle ON/
OFF lever must be returned to the OFF (middle)
position to reset the spindle switches, which will
enable spindle rotation.
Figure 10. Foot brake and spindle ON/OFF lever.
Foot Brake
Spindle
ON/OFF Lever
Tailstock Controls
Figure 9. Tailstock controls.
A
F
G
B
C
D
E
H
A. Tailstock Handwheel: Moves the quill toward
or away from the spindle.
B. Graduated Scale: Indicates quill movement
in increments of 0.001". One full rotation of
handwheel is 0.100".
C. Tailstock Lock Lever: Secures the tailstock in
place along the bedway.
D. Quill Lock Lever: Locks the quill in position.
E. Quill: Holds centers or tooling with an MT#4
taper. Moves toward and away from the
spindle.
F. Tailstock Offset Screw: Adjusts and secures
the tailstock offset (1 of 2).
G. Gib Adjustment Screw: Adjusts the tailstock
gib that controls side-to-side movement (1 of
2).
H. Offset Scale: Indicates the distance of
tailstock offset from the spindle centerline.
The scale increments are arbitrary.