Filter
Top Products
14 ► IW12 User Manual
Drive Size ................................................................................... 3/4-inch Square Drive, 5/8-inch Hex Quick Change
Weight ........................................................................................................................................................14 lbs/6 kg
Overall Length .................................................................................................................................. 9-1/2-inch/24 cm
Width ...................................................................................................................................................... 4-inch/10 cm
Pressure Range.................................................................................................................1000-2000 psi/70–140 bar
Flow Range ...............................................................................................................................4–12 gpm/15–45 lpm
Optimum Flow ...........................................................................................................................5–10 gpm/20–38 lpm
System Type ........................................................................................ Open and Closed Center, HTMA Type II or III
Porting ....................................................................................................................................................8 SAE O-ring
Output Speed (free spin) ...................................................................................................2000 rpm at 5 gpm/19 lpm
Input Speed ......................................................................................................................... 1200 Impacts per Minute
Connect Size and Type ....................................................................................................3/8-inch Male Pipe Adapter
Torque...........................................................................................................................250–1200 ft. lb/340–1632 Nm
SOUND AND VIBRATION DECLARATION
Test conducted on 1212140, S/N 121610100 operated at standard 10 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels 108 dBA
Uncertainty, Kwa, in decibels 3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels 95 dBA
Uncertainty, Kpa, in decibels 3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard
ISO 3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents
an upper boundary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value (Main Handle): a 10.9 m/sec²
Uncertainty: K 1.2 m/sec²
Measured vibration emission value (Assist Handle): a 11.2 m/sec²
Uncertainty: K 1.2 m/sec²
Values determined according to ISO 28927-2, ISO 5349-1,2
ACCESSORIES
Description Part Number
3/4-inch Square Anvil to 3/4-inch Jacobs Chuck ...............................................................................................01857
7/16-inch Hex Shank × 1/2-inch Square Male Adapter...................................................................................... 05117
5/8-inch Hex Shank × 1/2-inch Square Male Adapter........................................................................................05080
3/4-inch Square Anvil to 5/8-inch Hex Quick Change Adapter ..........................................................................06790
AUGER DRILL BITS – LINEMAN’S STYLE
5/8-inch Hex Shank use with Hex Adapter 06790
5/8 Hex Pole Bit, 9/16 × 18 × 22 Overall Length ...............................................................................................27845
5/8 Hex Pole Bit, 13/16 × 18 × 22 Overall Length .............................................................................................27847
Assist Handle Kit ...............................................................................................................................................71706
SPECIFICATIONS