Filter
Top Products
IW24 User Manual ◄ 17
VALVE HANDLE CHANGE NOTICE
ALL IW24 IMPACT WRENCH MODELS
Notication of change in valve handle assembly and on/off spool.
Part numbers and compatibility (March 2013).
Beginning at serial number 031513001, the valve handle assembly has changed. The prior style (part #
17279) used a steel spool sleeve installed in the valve handle assembly. The new style valve handle assembly
(part # 73167) does not use a spool sleeve.
New style valve spool assembly (part # 73046) is required for use in the new style valve handle assembly.
The new style valve handle assembly will only accept new style on/off spool (PN 73046). If replacing old
style 17279 valve handle assembly with new style 73167, replacement of 73046 valve spool is also required.
New style on/off spool 73046 will t old style and new style valve handle assemblies. Old style valve spool
P/N 07998 is no longer available and substitutes to new style 73046.
Please refer to the photos below of the old style and new style valve handle and on/off spools.
Old Style – No Longer Available New Style – Uses no sleeve in spool bore.
Please contact the Technical Service Department at 503-659-5660 with any questions.