Filter
Top Products
MB05 User Manual ◄ 7
• Do not operate the tool unless thoroughly trained or under the supervision of an instructor.
• Become familiar with the carrier controls before operating the carrier and the breaker.
• When operating the breaker you must use ear protection, eye protection, and breathing protection.
• While learning to operate the breaker and carrier, do so at a slow pace. If necessary, set the carrier mode selec-
tor to the slow position.
• Make sure all controls (levers and pedals) are in the NEUTRAL position before starting the carrier.
• While operating the breaker and carrier, keep hands and feet on the controls at all times.
• Before leaving the carrier, always lower the boom and insure the carrier is stable. Never leave the machine with
the engine running. ALWAYS ENGAGE THE PARKING BRAKE.
• Stop the engine before attempting to make any repairs, adjustments or servicing to either the carrier or the
breaker.
• Do not operate the tool at oil temperatures above 190 °F/88 °C. Operation at higher temperatures can damage
the internal components of the breaker and carrier and will result in reduced breaker performance.
• Do not operate a damaged, leaking, improperly adjusted, or incompletely assembled breaker.
• Do not modify the breaker in any manner.
• Use only tool bits supplied by Stanley Hydraulic Tools. Use of tool bits supplied by another manufacturer may
damage the breaker and will void the warranty.
• To avoid personal injury or equipment damage, all breaker repair, maintenance and service must only be per-
formed by authorized and properly trained personnel.
• If you do not understand how to safely operate your breaker, contact an authorized Stanley Dealer for assis-
tance.
• Keep this manual with the breaker.
• Do not operate this equipment if you are taking medication which may affect your mental judgement or physical
performance.
• Do not operate this equipment if you are under the inuence of drugs or alcohol.
SAFETY PRECAUTIONS