Filter
Top Products
FASTENER DEPTH CONTROL ADJUSTMENT
When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
TO ADJUST
THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting any parts disassembly and before
changing the work contacting element adjustment.
1. Rotate the fastener control adjustment to the right to increase
depth of drive or to the left to decrease the depth of drive.
DIRECTIONAL EXHAUST DEFLECTOR
The adjustable exhaust deflector can be rotated into any desired position
by hand without the use of any tools.
REMOVING NAILS
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and remove nails.
7
Exhaust Deflector