Bostitch BTFP12233 Nail Gun User Manual


  Open as PDF
of 46
 
-10-
IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS
MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION
•UsetheBOSTITCHpneumatictoolonlyforthepurposeforwhichitwasdesigned.
•Neverusethistoolinamannerthatcouldcauseafastenertobedirectedtowardtheuser
or others in the work area.
•Donotusethetoolasahammer.
•Alwayscarrythetoolbythehandle.Nevercarrythetoolbytheairhose.
•Donotalterormodifythistoolfromtheoriginaldesignorfunctionwithoutapprovalfrom
BOSTITCH.
•Alwaysbeawarethatmisuseandimproperhandlingofthistoolcancauseinjuryto
yourself and others.
•Neverclamportapethetriggerorcontacttripinanactuatedposition.
•Neverleaveatoolunattendedwiththeairhoseattached.
•DonotoperatethistoolifitdoesnotcontainalegibleWARNINGLABEL.
•Donotcontinuetouseatoolthatleaksairordoesnotfunctionproperly.Notifyyournearest
BOSTITCH representative if your tool continues to experience functional problems.
INSTALLING THE BELT HOOK
Always disconnect tool from air supply before making adjustments or before attempting
any part assembly or disassembly.
Always remove the belt hook from the tool when selecting Contact Trip Mode.
1. Assure that the sequential trip mode is selected
2. Squeeze the sides of the belt hook body
3. Align the post on the belt hook body with the alignment hole and push into position
4. Release the sides of the belt hook body and check to ensure that the belt hook is locked in position
USING THE INTEGRATED PENCIL SHARPENER
A standard pencil sharpener is integrated into the belt hook for the operator’s convenience. To sharpen a
pencil, insert any standard pencil into the hole and rotate the pencil to the right (clockwise)to sharpen.
1
43
2
 previous next