1. Apply LOCTITE 242 to screw thread before
assembling hanger to tool.
2. Use a swivel type hook on the counterbalance
used to suspend this tool.
VALVE
ASSEMBLY
D60064A
SEE VIEW “A”
ITEM PART NO. DESCRIPTION
NO.
1. 121830 Cylinder
2. D16243 Cylinder Gasket
3. T20111 Trigger
4. T20018 Trigger Pivot Pin
5. T20049 Trigger Pin Retaining Ring
6. D16163A Frame
7. 85014 “O” Ring
8. D16168 Driver Guide L.H.
9. D16167 Driver Guide R.H.
10. D16179 Driver Block
13. UA4006.2 Driver Retaining Screw
14. D16327 Retaining Screw Spacer
15. D16180 Piston Rod
16. 85012 “O” Ring
17. D16185 Driver Block Pin
18. D14227B Piston
19. D16146 Piston Washer
20. 85016 “O” Ring
21. D16183 Escapement Roller
22. D16184A Clincher Link Plate
23. D14130 Clincher Link
24. D14132A Clincher Lever L.H.
25. D14133A Clincher Lever R.H.
ITEM PART NO. DESCRIPTION
NO.
26. D16111A Clincher Adj. Plate
27. D16112 Clincher Adj. Clamp
28. D16114 Front Plate
32. D16149A Pusher Assembly
34. UA4814.1 1/4-20 x 7/8 Soc. Hd.
Cap Screw
35. LW14.2 1/4 Lock Washer
36. UA9607 1/4 Pipe Plug
37. UA4816.12 1/4-20 x 1” Cone Pt.
Set Screw
38. HN1420.2 1/4-20 Hex Jam Nut
39. UA2810 #8-32 x 5/8” Soc. Hd.
Cap Screw
40. LW8 #8 Lock Washer
41. HN3824.4 3/8-24 Elastic Stop Nut
42. UA2808.1 #8-32 x 1/2” Soc. Hd.
Cap Screw
43. LW8 #8 Lock Washer
44. PW516.4 Washer
45. UA5812.3 5/16-18 x 3/4” Soc. Hd.
Cap Screw
46. UA 3808.8 #10-24 x 1/2” Soc. Hd.
Cap Screw
VIEW “A”
54
55
56
57