Filter
Top Products
User's Manual
8
Read the details on page 6 to help
determine the best position for your
loudspeakers.
The loudspeakers can be wall-
mounted, or simply placed on shelves or
cabinets
To wall-mount the loudspeakers, please
follow the instructions below.
Tools required:
• Phillips screwdriver
• Pencil or other marker
• Electric drill and 5/16" drill bit
• Level
• Safety glasses
• Step ladder if needed
• Electronic stud nder
• Wood screws and dry wall anchors
with screws are supplied
Installation
Preliminary steps:
• Clear the area where you are going
to work, so it will be safe.
Make sure there is no wiring, or
gas or water pipes behind the wall
where you are going to drill!
• Temporarily remove any wall-
mounted at screen display if you
will be working close to it.
• We recommend mounting the loud-
speakers into a wall stud.
• We recommend that the loudspeak-
ers are mounted horizontally, al-
though vertical mounting is offered
as an option.
• If you have to mount the loud-
speakers onto a masonry wall, we
recommend that you consult with
your hardware supplier to buy suit-
able masonry hardware.
The HRS-SAT4BIP weighs 7.0 lb.
(3.2 kg). You should allow a good
safety margin when mounting. If in
doubt, please contact your Sunre
dealer for professional installation.