Filter
Top Products
8
2. Select the output adapter tip that fits securely into the power jack on your portable device. See
Adapters on page 11 for detailed information about the adapter tips.
3. Connect the output adapter tip to the power output cord (but not the device).
Connect the Power Output Cord
1. Plug the large end of the power output cord into the DC OUT jack on the end of myPower ALL Plus.
Connect the Portable Device
1. Connect the output adapter tip into the power jack on the portable device.
2. If the internal battery is installed in the connected device, turn on the device.
3. Slide the power switch to ON. The MP3700 will automatically detect and set the required output
voltage.
4. If the portable device is not already turned on (step #2), turn on the portable device. While connected,
myPower ALL Plus will power (or power and charge in some cases) your device.
5. When finished, unplug the power output cord from your device and slide the power switch to OFF to
turn off the battery when not in use.
TIP: For most portable devices, myPower ALL Plus can be used to power the device even when the
device battery is not installed.