Filter
Top Products
9
6. Connect one end of a network cable to the
TEW-687GA's LAN port. Connect the other
end of the network cable to your media device
or game console's network port. Verify that the
panel lights are on: Power (Blue/Solid),
Network Port (1-4) (Blue/Blinking), and
Wireless (Blue/Blinking).
7. Verify that your media device or game console
is connected to your network. If the network
setting on your game console or media device
is set to obtain an IP address automatically
(dynamic IP) an IP address will be assigned
automatically. Please refer to the manual or
contact your media device or game console's
technical support for instructions.
Configuration is now complete.
5. Once the WPS button becomes steady blue
(approximately within 120 seconds), the
TEW-687GA has been successfully configured.
4. Within 60 seconds press and hold the WPS
button on the TEW-687GA for 2 seconds. The
WPS button will start to blink.