Tripp Lite APS PowerVerter Battery Charger User Manual


 
14
Specifications
(Corded Models)
CORDED MODELS: APS 1012 APS 1024
Weight: 26.4 lbs. 26.4 lbs.
INVERTER
Continuous power (@ 20° C): 900 W 1000 W
Surge power (5 seconds): 1800 W 2000 W
Efficiency (Full Load): 90% 90%
Minimum DC Fuse Rating: 225A 125A
DC Input Current @ Nominal V DC
Full Load 95 A 47 A
No Load 2.2 A* 1.3 A*
Nominal Input Volts: 12 VDC 24 VDC
DC Input Voltage Range: 10-15 VDC 20-30 VDC
Nominal Output Volts: 120 VAC ±5% 120 VAC ±5%
Nominal Output Frequency: 60 Hz ±.3% 60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC: 30 A 15 A
Maximum Cable Length 2 ft. 7 ft.
Acceptance Volts VDC: Selectable Selectable
14.4 V**/14.2 V Wet**/Gel 28.8 V**/28.4 V Wet**/Gel
Float Volts VDC (w/gel): 13.3 V (13.6 V) 26.6 V (27.2 V)
Input Voltage AC: 120 V 120 V
Input Current AC: 8 A 8 A
LINE VAC OPERATION
Minimum Input AC Volts: Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum): Selectable 135** or 145 VAC Selectable 135* *or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum): 12 A 16 A
Input Frequency: 60 Hz ±10% 60 Hz ±10%
Maximum Output AC (Continuous): 8.3 A 8.3 A
Automatic Transfer Time: 4-6 ms 4-6 ms
*Load sense can reduce this to 1/30 of the listed current.**Factory default setting.
200103046 120V APS MV-cabinetEn-Sp 93-1911.qxd 7/2/01 10:18 AM Page 14