Tripp Lite APS PowerVerter Battery Charger User Manual


 
15
Specifications
(Hardwired Models)
HARDWIRED MODELS: APS 2012 APS2424
Weight: 38.0 lbs. 41.0 lbs.
INVERTER
Continuous power (@ 20° C): 2000 W 2400 W
Surge power (5 seconds): 4000 W 4800 W
Efficiency (Full Load): 90% 90%
Minimum DC Fuse Rating: 500A 300A
DC Input Current @ Nominal V DC
Full Load 192 A 112 A
No Load 2.5 A* 1.5 A*
Nominal Input Volts: 12 VDC 24 VDC
DC Input Voltage Range: 10-15 VDC 20-30 VDC
Nominal Output Volts: 120 VAC ±5% 120 VAC ±5%
Nominal Output Frequency: 60 Hz ±.3% 60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC: 60 A 30 A
Maximum Cable Length 1 ft. 3 ft.
Acceptance Volts VDC: Selectable Selectable
14.4 V**/14.2 V Wet**/Gel 28.8 V**/28.4 V Wet**/Gel
Float Volts VDC (w/gel): 13.3 V (13.6 V) 26.6 V (27.2 V)
Input Voltage AC: 120 V 120 V
Input Current AC: 16 A 16 A
LINE VAC OPERATION
Minimum Input AC Volts: Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum): Selectable 135** or 145 VAC Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum): 32 A 36 A
Input Frequency: 60 Hz ±10% 60 Hz ±10%
Maximum Output AC (Continuous) 16.7 A 20 A
Automatic Transfer Time: 4-6 ms 4-6 ms
HARDWIRED MODELS (Cont.): APS 2448 APS3636VR
Weight: 38.0 lbs. 56.9 lbs.
INVERTER
Continuous power (@ 20° C): 2400 W 3600 W
Surge power (5 seconds): 4800 W 7200 W
Efficiency (Full Load): 90% 89%
Minimum DC Fuse Rating: 300A 300A
DC Input Current @ Nominal V DC
Full Load 56 A 114 A
No Load 1.5 A* 1.7 A*
Nominal Input Volts: 48 VDC 36 VDC
DC Input Voltage Range: 40-60 VDC 30-45 VDC
Nominal Output Volts: 120 VAC ±5% 120 VAC ±5%
Nominal Output Frequency: 60 Hz ±.3% 60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC: 15 A 30 A
Maximum Cable Length 12 ft. 4.5 ft.
Acceptance Volts VDC: Selectable Selectable
57.6 V**/56.8 V Wet**/Gel 43.2 V**/42.6 V Wet**/Gel
Float Volts VDC (w/gel): 53.2 V (54.4 V) 39.9 V (40.8 V)
Input Voltage AC: 120 V 120 V
Input Current AC: 16 A 24 A
LINE VAC OPERATION
Minimum Input AC Volts: Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum): Selectable 135** or 145 VAC Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum): 33 A 54 A***
Input Frequency: 60 Hz ±10% 60 Hz ±10%
Maximum Output AC (Continuous) 20 A 30 A
Automatic Transfer Time: 4-6 ms 4-6 ms
*Load sense can reduce this to 1/30 of the listed current.**Factory default setting. ***When AVR is boosting incoming current.
200103046 120V APS MV-cabinetEn-Sp 93-1911.qxd 7/2/01 10:18 AM Page 15