unigreen 7
Refer to the enclosed handbooks for the use and maintenance of the pump and
pressure regulator and any accessories or motors.
b) Please contact the agent in your zone, the nearest authorised workshop or
UNIGREEN S.p.A. directly for any repairs the user feels they aren’t capable of
performing alone. (see point 10.4)
c) Due to the complexity of the equipment and the variety of technologies used
(mechanical, hydraulic, oil-pressure and electrotechnical) operators must not
dismantle or modify the equipment. All of the relevant operations must be performed
by specialised personnel, authorised by UNIGREEN S.p.A.
2.4.1 TAKING PRECAUTIONS AGAINST FIRE HAZARDS
Don’t use naked flames or heat sources near the machines.
The sprayers are made with many materials that derive from petroleum: tanks,
tubes, pipes and hoses, wheels and plastic parts; furthermore the presence of
oils of various nature and residues of chemical products make them potentially
flammable.
2.5 WEATHER CONDITIONS
We recommend spraying in the early hours of the morning or late in the afternoon,
avoiding the hottest time of day.
Never do any spraying if it’s raining or rain is forecast.
Don’t spray in strong wind or in any case, in winds above 3/5 m/second.
If you have to spray in windy conditions, use relatively low pressures to obtain
quite large drops that are less sensitive to drifting (being heavier the wind has
less effect). There are also special anti-drift nozzles available from UNIGREEN
S.p.A.; for information, please contact our offices.
2.6 MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATER
There are versions of the machines designed only to be used with a hose reel for
washing with cold clean water.
These machines cannot be used with chemical products as they don’t have some
of the devices or accessories that are needed to use these products safely.
These machines are identified by the word “washing” on the CE plate.
2.7 DRIVING ON THE ROAD
The CAMPO series atomisers are not specifically designed for road use.
Nevertheless, many models are also available in the version homologated for
road traffic with the tank empty.
You should check with your local reseller on the correct couplings to use and use
tractors that meet the regulations in force.
3 CHARACTERISTICS AND SPECIFICATIONS
This handbook is valid for tractor-mounted sprayers to be used with:
a) horizontal booms per herbaceous cultivations (herbicides, insecticides,
fungicides, foliage nutrient, etc.)
d) treatments with hand lances with or without a hose reel
e) hand lances for washing with or without a hose reel
The UNIGREEN S.p.A. sprayers are identified by the CE plate (FIG. 1 ) bearing
one of the marks indicated in the tables of the allowed fittings (TABLE N° 12a,
page 29). The tables above contain a summary of the indications envisaged for
the markings.
3.1 TABLES OF FITTINGS ALLOWED
Table N° 12 let you identify the version of your machine indicating the basic
equipment and all the possible fittings available (optional).
You can also find the other fittings allowed or other versions to meet your require-
ments in the future.
THE FITTING DEFINED IN TABLE N° 12 (PAGE 27) SHOULD BE CONSID-
ERED BINDING FOR THE VALIDITY OF THE DECLARATION OF CONFORM-
ITY.
Other fittings or setups of basic components and optionals should be considered
unsafe and therefore are not covered by the guarantee and aren’t UNIGREEN’s
responsibility.
The same goes for fittings realised with components or accessories that aren’t
original UNIGREEN parts.
UNIGREEN accessories can easily be identified by the label with the yellow
background “ORIGINAL UNIGREEN ACCESSORY”
TYPE : .......................................................................
code: ........................................ N˚ ...........................
massa a vuoto: ..........................Kg. max press. : ........... bar
net mass
massa totale ammessa: .............................. Kg.
total mass
via Rinaldi, 105 - Reggio Emilia ITALIA
ANNO
YEAR
20 .......
made in
Italy
FIG.1