Vector SL101MV Work Light User Manual


 
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY
TO PERSONS:
1 . Bulb (lamp) gets HOT quickly, Only contact switch when turning on.
2 . Do not touch hot lens, guard or enclosure.
3 . Do not look directly at lighted lamp.
4. Keep lamp away form materials that may burn.
5 . Do not touch the bulb (lamp) at any time.
6 . Keep protective guard (glass) in place.
7 . Do not operate this unit with a missing or damaged guard or glass lamp containment
b a r r i e r.
8 . Charge (use) only with originally supplied power adapter.
9 . Do not use any accessory not recommended by the manufacturer.
1 0 . Do not expose to flame or spark.
1 1 . Charge indoors only. Do not expose power adapter to water.
1 2 . Use flashlight in dry location(s) only. Do not expose flashlight to water.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not operate unit with damaged cord or plug; or if the unit has received a sharp blow,
been dropped, or otherwise damaged in any way.
• Do not open body casing. There are no user- s e rviceable parts inside; take it to a qualified
s e rvice technician when service or repair is required. Incorrect reassembly may result in a
risk of electric shock or fire, and will void warranty.
WARNING: EXPLOSION HAZARD:
Dispose of used batteries properly. Do not
dispose of batteries in fire. This may result in an explosion.
WARNING: FIRE HAZARD:
Never contact combustible material to the lens.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• All halogen lights give off heat:
– Do not plug in a power supply without the bulb lens and cover in place.
– Do not touch lens while operating.
– Keep combustibles away from spotlight lens. Extreme heat can cause fires.
– Never place the light face-down on any surface when lit.
• DO NOT expose this unit to extremely high temperatures.
• Never look directly into the light or shine the light into another person’s eyes.
• Keep sharp objects away from lens – it is glass and can break.
• Do not immerse spotlight in water.
• Do not drop or throw spotlight. It contains glass and a sealed lead acid battery.
• Use only with AC and DC Charging Adapters that are provided with unit. Plug in the
charging adapter at the spotlight first, then plug into the charging sourc e .
• For initial charge (AC method), allow 20 hours for completion of a full charging cycle.
• Do not overcharge: recharge up to 20 hours maximum using either the AC or DC method.
• NEVER ATTEMPT TO USE THE AC CHARGER AND DC CHARGING PORT SIMULTA N E O U S LY.
3
SL101MV ManualEN 101007.qxp 9/26/08 12:44 PM Page 3