Vector SL101MV Work Light User Manual


 
TROUBLESHOOTING GUIDE
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call: 1-800-
5 4 4 - 6 9 8 6 .
WA R N I N G : The use of any accessory not recommended for use with this tool could be
h a z a r d o u s .
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. Whether you need technical advice, repair, or
genuine factory replacement parts, contact the Black & Decker location nearest you. To find
your local service location, refer to the yellow page directory under "Tools—Electric" or call:
1-800-544-6986 or visit www. b l a c k a n d d e c k e r. c o m .
FULL ONE-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for one year against any defects in material
or workmanship. The defective product will be replaced or repaired at no charge in either of
two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should be
made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be required. Please check with the retailer for their specific
return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may be
required. Black & Decker owned and authorized Service Centers are listed under "To o l s -
Electric" in the yellow pages of the phone directory and on our website
w w w. b l a c k a n d d e c k e r. c o m .
P r o b l e m S o l u t i o n
Red LED light does not
turn on when charging
Check for bad connection to spotlight recharge port
Check for bad connection to AC or DC adapters
Confirm there is a functioning AC or DC current.
Trigger cannot be pressed
f u l l y
Check to see if trigger lock is locked. If it is, press lock
button on either side of handle to unlock.
Unit does not operate B a t t e r y may be completely discharged. Charge unit using
supplied AC or DC adapter. Follow charging instructions in
this instruction manual.
Bulb may be blown Check bulb filament. If filament is coiled and unbroken, the
bulb is NOT blown. If filament is broken, refer to the
“ S e rvice Information” section of this instruction manual.
7
SL101MV ManualEN 101007.qxp 9/26/08 12:44 PM Page 7