Vector VEC126 Work Light User Manual


 
For best results and to prevent damage to spotlight:
Use only the charging devices included with your ULTRA SPORT SPOT, or a Vector
Manufacturing replacement. Replacement bulbs and batteries are available from our
customer service department by calling (954)584-4446 or call toll free
866-584-5504, 9:00 am to 5:30 pm (est).
Charge battery with AC adapter for at least 18 hours. Do not charge longer than
24 hours.
Do not let battery run down completely. (A dim light indicates a low battery.) Recharge
battery as soon as possible after each use.
If spotlight is not in use, charge battery at least every five months. Failure to do so will
result in damage to the battery. Always keep battery fully charged when not in use.
Do not allow metal to touch the square metal contacts on the battery. This can cause a
short circuit that could result in fire. Always put the battery safety cover on when
battery is removed.
8
SPECIFICATIONS
Spotlight Bulb . . . . . . . . . . . . . . . . . . . . .H3 Proprietary, 12 Volt
Area light bulb . . . . . . . . . . . . . . . .2.6 Watt, Proprietary, 12 Volt
Battery . . . . . . . . . . . . . . . . . . . .12 Volt, 3 AH Sealed Lead Acid
AC Charger . . . . . . . . . . . .110 VAC to 12 VDC 500 mAmnbnm
FUSE
SPRING
CONTACT
FLANGE
BATTERY DISPOSAL
THIS UNIT CONTAINS A MAINTENANCE-FREE, NON-SPILLABLE, LEAD ACID
BATTERY WHICH MUST BE DISPOSED OF PROPERLY. SOME STATES REQUIRE
RECYCLING. DISPOSAL QUESTIONS? IN USA, CALL 1-877-288-7722
FUSE REPLACEMENT
The DC plug contains a 10 amp fuse. If the fuse blows, investigate the reason and fix the
problem. Then replace the fuse. Disconnect the spotlight from the DC adapter, unscrew the
flange on the DC counterclockwise. remove the end contact and fuse. Replace the flange
and tighten clockwise. DO NOT OVERTIGHTEN FLANGE.
USAGE TIPS