Vector VEC126 Work Light User Manual


 
Figure C.
Figure D.
4
1. Slide the battery pack cover towards the handle. Completely remove the cover and
set it aside.
2. The battery pack can be removed from the light by carefully tapping the unit and
freeing the battery.
3. Make sure the battery pack contacts are not shorted to any metal objects.
Plug the AC adapter into the battery and charge for eight hours. If battery is severely
discharged then charge it for 12 hours. DO NOT OVERCHARGE BATTERY.
CORDED OPERATION
NOTE: During corded operation, the battery may be left in the unit, and will charge while the
spotlight or area light are being used. A full charge takes about 3-4 hours using the DC
method or the battery may be removed for charging (using the 12-volt 110-volt AC method.)
1. Insert 12-volt DC power plug into DC adapter plug at bottom of handle
(Figure C).
2. Plug the other end into any vehicles cigarette lighter receptacle or other compatible 12-volt
DC power source.
CHARGING THE BATTERY WITH 110-VOLT AC ADAPTER
The 110-volt AC adapter provides a much more effective charge compared to charging with a
12-volt DC power source. Because the battery pack is removable, you can charge the battery
at home while your
ULTRA SPORT SPOT® is being operated with the 12-volt DC power cord.
For extended use, we recommend purchasing an additional battery as back-up. Call Vector
Customer Service department at 954-584-4446 or toll free at 866-584-5504
10 AMP FUSE
DC ADAPTER PLUG CONNECTION
Figure D.