Filter
Top Products
4
ASSEMBLY & SET-UP cont.
Moving the Clamp Lamp to a New Location:
1. Unplug lamp from power source.
2. Turn the tightening knob counterclockwise 1/4 turn to loosen the lamp shaft
and pull lamp out of clamp socket.
3. Move clamp assembly, secure it to surface and replace lamp
into clamp socket.
4. Turn tightening knob clockwise to secure and plug lamp into outlet.
BULB REPLACEMENT
Removal
1. Unplug lamp from power source.
2. To access the bulb, remove grid diffuser by
depressing the tab and lifting it out. (See
page 4)
3. Firmly hold bulb base (B) and pull bulb (C)
from the socket (A) in an outward motion.
Installation
1. Unplug lamp from power source.
2. Firmly hold base (B) and push bulb (C) into the socket (A).
3. Be sure bulb is fi rmly seated in the socket (see below) and
snapped into the metal bulb clip (D).
4. Replace grid diffuser.
A
B
C
D
Correctly seated bulb Incorrectly seated bulb
No Gap Notice
Large Gap