Filter
Top Products
Safety instructions
3-15
R
3.9 Working with the Stud Welder
* Observe all accident prevention regulations which are applicable for
operating your Stud Welder
The accident prevention regulation VBG15 “Welding, Cutting and
☞ similar work methods” is applicable for Stud Welders. For more
information contact the employer’s liability insurance association.
ƽ MORTAL DANGER
Do not weld with work dress which is soiled with easily combustible
substances such as oil, grease, paraffin oil etc.
If an accident happens:
• switch off the Stud Welder, disconnect the power supply and
• call a doctor.
3.10 Safety instructions for maintenance, inspection and assembly
operations
Only carry out maintenance The User shall ensure that all maintenance, inspection and assembly
work when the Stud Welder operations are carried out by authorised and qualified technical personnel
has come to a standstill after having sufficiently informed himself by studying the Operating Instructions
carefully.
Principally, operations may only be carried out when the Stud Welder has
come to a standstill. The procedure to bring the Stud Welder to a standstill
described in the Operating Maintenance Instructions must be observed.
Immediately after completing the work, ensure that all safety and protection
features are restored and that these function.
3.11 Independent retrofitting and spare parts production
Retrofitting or modifications of the Stud Welder are only permissible with the
manufacturer’s approval. Original spare parts and authorised accessories are
designed to guarantee safety. The use of any other parts may result in an
annulment of warranty for any damages thus caused.