Vicks PS-3K Welder User Manual


 
Initialisation
5-21
R
5.2 Connecting the Stud Welding Pistols to the Stud Welder
The Stud Welding Pistols are connected to the Stud welder using the pistol
and control cables.
Insert welding cable plug of the Stud Welding Pistol into the welding cable
socket (8/10)
Insert control cable plug of the Stud Welding Pistol into the control cable
socket (9/11) and lock with spring clip
Observe the connecting instructions in the Operating Instructions for Stud
Welders.
5.3 Operation
Create ground connection of the Stud Welder
Connect Stud Welding Pistol as described in Chapter 5.2
Set Stud Welding Pistol as described in Chapter 4
Connect Stud Welder to power supply
Set Stud Welder for the welding studs to be welded
Insert welding stud into the stud holder
Position Stud Welding Pistol onto the workpiece and press release switch
SZ.0015.E
89
10 11
T
ype
Stud Welder
BMS-6H, BMS-8H
10 Socket for connecting welding
cable
11 Socket for connecting control
cable
T
ype
Stud Welder
BMS-660-90, BMS-690-135
8 Socket for connecting welding
cable
9 Socket for connecting control
cable
Pistol +