Filter
Top Products
29
B_04076
2
3
6
5
1
4
8
B_04077
2
1
3
5
7
6
4
8
OPERATING MANUAL
VERSION 03/2013 ORDER NUMBER DOC 2310799
6.3 ASSEMBLING THE PUMP
Notice
This pump can be used as part of a spraying system for Airless
or AirCoat applications. Individual supplement components
for this pump can be found in the Wagner Accessories
Catalogue, or can be put together with the Spraypack
Con gurator. The nozzles must be selected according to the
gun instructions. In the case of spraypack orders, the pumps
(1) are already pre-mounted on a trolley (6) or on a stand at
the factory.
Procedure:
1 Mount pump (1) on stand, trolley (6), or wall mount.
2 Mount an AirCoat system with the pressure regulator
(7) and secure the thread at the air inlet to the pump
(1) with Loctite 270.
3 Mount suction system (5).
4 Mount the return valve (8) for pressure relief or
material circulation.
5 Mount return tube (4) or return hose.
6 Connect the high pressure hose (2) and gun (3) in
accordance with the gun operating manual.
Example:
Airless system
Example:
AirCoat system
Inclined ground!
Risk of accidents if the device rolls away/falls.
WARNING