12 PowrDriver
GB
Type of malfunction
A. Engine does not start
B. Engine races to high rpm or
stalls during operation
C. Engine operates, PowrDriver
does not move forward or
reverse.
D. Engine operates, PowrDriver
moves slowly in forward or
reverse.
E. Engine continues to run when
operator exits PowrDriver.
F. Engine misses during turns and
forward and reverse changes.
G. Engine runs for short time and
stops.
Possible cause
1. Engine switch OFF, no gas or low oil.
2. Battery empty.
3. Nobodyinthedriver‘sseat,thesensorisnot
triggered.
1. Worn throttle lever, governor
1. Low hydraulic oil.
2. Thegaspedalhasbeenincorrectlyadjusted.
1. Low hydraulic oil.
2. Thegaspedalhasbeenincorrectlyadjusted.
1. Defective safety switch.
1. Engine oil low.
1. Fuel ow restriction.
Measures for eliminating the malfunction
1. Consult engine manual.
2. Pull the starter rope
3. Sitdowninthedriver‘sseat
1. Consult engine manual.
1. Fill with hydraulic oil.
2. Usetheadjustmentleverforthegaspedaltocorrectit.
1. Fill with hydraulic oil.
2. Usetheadjustmentleverforthegaspedaltocorrectit.
1. Contact Wagner Customer Service.
1. Fill to correct oil level.
1. Consult engine manual.
Remedy in case of faults
If you are still experiencing problems after having followed these steps, contact Wagner Customer Service