Filter
Top Products
Start
1
Clean the
Spray Gun
Filter
What you’ll need
•Wrench
•Warm, soapy water for latex
material
•Mineral spirits for oil based
materials
•Replacement spray gun lter
(if necessary)
5. Remove lter from housing
9. Reassemble spray gun8. Replace cleaned lter, tapered end rst,
into gun housing. Note: It is important to place
tapered end rst to ensure proper sprayer
operation
7. Inspect
lter for
damage and
replace if rips
are found
IMPORTANT: Never clean
lter by poking with sharp
object.
Perform Pressure
Relief Procedure
Page 7
6. Clean with appropriate
cleaning solution for material
being used; warm, soapy water
for latex material and mineral
spirits for oil based material
3. Pull trigger guard to separate from lter
housing
PULL
4. Unscrew lter housing using
a wrench
2
5 6 987
3 4
English
15
Tips if Experiencing Spray Issues • Clean the Spray Gun Filter
Tips if Experiencing Spray Issues