Filter
Top Products
GB
27
WallPerfect W 665 I-Spray
Attention: Position of needle must be congruent with the nozzle aperture.
(Fig.15)
Put the air cap (Fig. 16, 3) onto the nozzle (4) and tighten it using the union nut (2).6)
Position the adjustment ring (g. 17, 1) on the union nut so that the recesses on the 7)
adjustment ring can snap into both horns on the air cap.
Place the container seal from below on the suction tube and slide it over the collar, 8)
while turning the container seal slightly.
Insert the suction tube with container seal in the gun body.9)
16. Maintenance
WARNING! Never operate the machine without the air lter; dirt could be sucked
in and interfere with the function of the machine.
Disconnect plug before changing parts.
Change the air lter if it is soiled. Use a screwdriver to lever the cover fastening from
•
the unit (Fig. 18, arrow).
Insert a new air lter into the compartment (Fig. 18, 1).
•
Replace the cover on the unit until it latches.
•
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part (Fig. 19, 7).
17. Spare Parts
Spare Parts List (Fig. 19)
Pos. Name Order No.
1 WallPerfect I-Spray spray attachment incl. 1800 ml container 2326 477
2 Spray jet adjustment ring 2328 900
3 Union nut 2328 903
4 Air cap 2328 905
5 Nozzle 2328 908
6 Nozzle seal (2 pcs.) 2304 433
7 O-ring 0417 308
8 Ventilating hose, valve cover, diaphragm 2304 027
9 Container seal 2328 919
10 Suction tube 2328 922
11 Container with cover 1800 ml (only for WallPerfect spray
attachment)
2304 025
12 Handle 2303 300
13 Air hose 2303 410
14 Carrying belt 0414 204
15 Air lter 0414 700
16 Cover 0414 302