Filter
Top Products
D
50
WallPerfect Flexio 995
Varnish paints and glazes
GB
50
WallPerfect Flexio 995
i
The following chapters 20-26 describe working with vinyls and lacquers with
the spray attachment.
Read chapters 9-19 if you want to use wall paint with the Flexio 995.
20. Starting work with the spray attachment
•
Put the machine down only on a level,
clean surface.
•
Before connecting to the mains supply, be
sure that the supply voltage is identical
with the value given on the rating plate.
•
Plug in the power cable.
•
Aligning suction tube. (Fig. 16)
If the suction tube is positioned correctly,
the container contents can be sprayed
without almost any residue.
When working on lying objects: Turn
the suction tube forwards. (Fig. 16 A)
Spraying work when working on overhead
objects: Turn the suction tube rearwards.
(Fig. 16 B)
•
Set the container on a sheet of paper, pour
in the prepared coating material.
•
Screw the container tightly onto the spray
gun
•
Connect gun handle and spray attachment
together. (g 17).
•
If already attached, remove the air hose from
the grab handle of the spray lance.
i
Only the air hose is required for
operating a spray attachment
with the Flexio 995. To facilitate
handling, the material hose can
therefore be removed from the
air hose and the suction hose
can be detached from the basic
unit.
click
A
B
A