Filter
Top Products
D
57
WallPerfect Flexio 995
Varnish paints and glazes
General
GB
57
WallPerfect Flexio 995
Problem Cause Remedy
Poor covering
capacity on the wall
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
➞ The material you are
spraying should be at
room temperature
➞ Cross spray (Fig. 11)
➞ Closer to the object
27. Maintenance
Check the air lter (g. 30, 1) after use and
replace depending on how soiled it is.
Insert a new air lter (order no. 2310 812) and
replace the lid (2).
i
WARNING! Never operate the
machine without the air lter;
dirt could be sucked in and
interfere with the function of
the machine.
To make assembly easier, apply lubricant
(enclosed) to the specied areas after
cleaning (g. 31).
28. Storage
i
After assembly, the air pipe
and grab handle can no
longer be separated.
Do not try to disassemble
them by force!
•
Store the device only when cleaned
properly.
•
Release the pull wire.
•
Release the trigger stop.
1
2