Filter
Top Products
1.5 CE Conformity
1.5.1 Short explanation
CE = Communauté Européenne:
Products identified with the CE mark have been manufactured and checked according
to EU guidelines. This means that, in terms of materials used, manufacturing process
and operation, they are in accordance with the EU safety and health requirements and
therefore the EU regulations and standards. The regulations and standards applying to
a particular product can be found in the CE Certificate of Conformity. This is enclosed
with the product or can be requested from the manufacturer. The CE identification
has been compulsory in Europe since 1st January 1995, and only products bearing
CE identification may be released into circulation.
EMC test:
The electromagnetic compatibility test forms an integral part of the CE conformity.
EMC tested products are built such that their interference radiation does not influence
other devices within the stipulated limits (noise on the radio, etc.). The EMC standard
differentiates between use in domestic, business and commercial or industrial areas.
Moreover, if required for comfort or safety reasons, products can be EMC tested for
their interference immunity. This means they are protected from the influence of
external interference.
1.5.2 EC Certificate of Conformity
The certificate with the Part No.:
0179 780
is enclosed with this product. This can be reordered from your WAGNER representa-
tive, quoting the product and serial number.
GM 2000 EAC - EN
1.6